Terminator ID Tags
Engine Bay & Console Tags available for '03-'04 Cobra.
Plate is Brushed Aluminum.
|
Gary Loat's Terminator ID Tags
|
| Item Number | Price | Tag Description |
| CT-3 |
$25.00 --
Engine Bay ID Tag |
For Engine Compartment
You MUST include the following vehicle information with your order. After you click on the PayPal button you will go to a PayPal payment screen. when you pay by PayPal, or include in your email if you are contacting the vendor for instructions on mailing in your order. Please DO NOT send an email to CobraBob. ID Tag order information MUST be emailed to bullitt@telus.net. * VIN (Vehicle Information Number) * Build Date * SVT Build # * Owner Name (up to 25 characters) * Model Year (2003 or 2004) If you don't know your Build Number or Build Date, you can call SVT at 1-800-FORD-SVT. Give them your VIN and they can provide you with the information. There should be no charge for this info. However, if you need an actual Build Certificate there is a charge. |
| CT-2 |
$22.50 -- Interior
Console ID Tag) |
For Interior Console
Include the following vehicle information in the PayPal
Notes/Comments box when you pay by PayPal, or include in
your email if you are contacting the vendor for instructions on mailing in your order.
Please DO NOT send an email to CobraBob.
ID Tag order
information MUST be emailed to bullitt@telus.net. |
| CT-1 |
$44.50 -- Both the Engine Bay ID Tag and the Interior Console ID Tag) |
Both
Engine Compartment and Interior Console Tags (special set
pricing) Include the following vehicle information in the PayPal Notes/Comments box when you pay by PayPal, or include in your email if you are contacting the vendor for instructions on mailing in your order. Please DO NOT send an email to CobraBob. ID Tag order information MUST be emailed to bullitt@telus.net. * VIN (Vehicle Information Number) * Build Date * SVT Build # * Owner Name (up to 25 characters) * Model Year (2003 or 2004) If you don't know your Build Number or Build Date, you can call SVT at 1-800-FORD-SVT. Give them your VIN and they can provide you with the information. There should be no charge for this info. However, if you need an actual Build Certificate there is a charge. |
When you have finished your order please click on the button below to view your Cart and start the check-out process.
Payment by
PayPal
or
USPS International Money Order.
For inquiries, and instructions for mailing in your order, send an email to: bullitt@telus.net
*** When Requesting Customer Service Assistance ***
Remember to include your Cobra model year (2003 or 2004), your mailing address, email address, Item Numbers, and all necessary Tag information with your
email correspondence when requesting customer service assistance.
For ID Tags available for
other Cobra models, including the 10th Anniversary Edition, please
contact the vendor at the above email address.
Many people ask what causes their shifter to be noisy.
Actually it isn't the shifter that is noisy. What you hear is transmission gear noise being transmitted through the shifter (especially billet shifters) into the cabin.
The thin, irregular bead of silicon sealer normally used on the bottom of the shifter base doesn't do well as a noise isolator. The only real noise isolator is the thick rubber gasket on the shifter handle. It isolates some of the gear noise from the transmission, but not near enough.
There IS an inexpensive and simple solution. Buy One Of My Shifter Gasket Sets!
By adding my Shifter Gasket Set you can reduce this gear noise and enjoy a quieter shifter. My shifter gaskets can be used on both stock and aftermarket shifters.



